2018 Land Pride RC6615 Series 2

Call for Price

Land Pride
RC6615 Series 2



The extra heavy-duty RC6615 Rotary Cutter has that extra muscle to cut in extreme conditions and still give you the quality cut you expect from Land Pride. With a cutting capacity of 4.5", the RC6615 allows you to tackle a variety of obstacles when cleaning neglected pastures and fields or maintaining roadsides. Both the 540 and 1000 RPM models offer pull-type self-leveling clevis hitches and rugged gearboxes that are capable of handling heavy cutting applications. The springs located in each wheel arm allows the shock loads to be minimized throughout the entire axle and the independent springs allow for a smooth ride through the roughest field.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested to meet rigorous voluntary testing procedures according to ISO 4254-13.
  • Factory assembled: Saves customer set-up time and money.
  • 7 Year gearbox warranty: Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
  • Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • 2 3/8" Output gearbox shaft: Large output shaft handles shock loads better.
  • 2 Piece shield on wing gearboxes: Driveline grease zerks are easier to access.
  • Self-leveling hitches: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Low hitch weight on tractor tongue: Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
  • Narrow A-frame hitch: Allows for a tighter turning radius.
  • Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
  • Adjustable driveline hanger: Serves as a support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor PTO shaft.
  • Input driveline: Cat. 6 CV or Cat. 5 Conventional: Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Drivelines with slip-clutches: RC56 Series: Cat. 4 standard RC66 Series: Cat. 5 standard: Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
  • Grease zerks on end caps of driveline cross journals: Intermediate and wing driveline cross journals are easier to grease. All drivelines have access holes for greasing the U-joints and inner profiles.
  • High blade tip speed: Allows clean cutting of material and even distribution.
  • 6" Blade overlap: Eliminates skipping during turns.
  • High cutting capacity: Can cut brushy areas with saplings up to 4" with 56 Series and 4 1/2" with 66 Series.
  • Pre-cut chamber: Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
  • Reinforced leading deck edges: Front of deck can withstand heavy brush and saplings.
  • 12" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
  • 10 Gauge smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • 7 Gauge smooth deck bottom: Heavy deck design holds up to harsh conditions. No bottom obstructions.
  • Replaceable 1/4" side skirt: Reduces debris piercing possibilities. Can be replaced if damaged.
  • Left wing rotates clockwise: Better discharge of material. Picks up tractor tracks.
  • 3/16" Stump jumper backed with a 1" thick mounting bar: Heavy round stump jumper. Can hold up to tough conditions.
  • Beveled skid shoes on wings: Reduces gouging the ground when turning.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
  • Greasable wing folding hinges: Provides for a long hinge life and allows wings to fold up and down with less stress.
  • 1" Solid hinge rods: Gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport locks: Holds transport wings in the folded-up position in case of hydraulic pressure loss.
  • Collapsible 1" leveling rods: Prevents damage and failure to leveling rods. Large diameter leveling rods provide superior supporting strength over rough terrain.
  • Enclosed dual leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
  • 5-Bolt hubs on trailing arms: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
  • Spring-cushioned trailing arms: Provides independent suspension, cushions loads on drawbar.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
  • Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting and can’t go flat.
  • LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
  • Roadway light kit option: Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.
  • Deck ring option: Keeps blades from damaging the deck.
  • Horsepower Range: 50 to 250
  • Gearbox Horsepower: 250 HP Splitter; 210 HP Center & Wing (Blade spindle gearboxes are built heavier)
  • Gear Box Lubrication: Gear Lube 80-90W EP
  • Gearbox Oil Capacity: 5.5 Pints: Divider Gearbox; 10 Pints: Center deck, LH deck & RH deck spindle gearboxes
  • Cutting Capacity: 4 1/2"
  • Tongue Weight: 1,860 lbs.
  • Machine Weight: Single row chain guards, 6 aircraft wheels, 540 CV main driveline & standard clevis hitch: 5,660 lbs.
  • Blade Tip Speed At 540 RPM: Center Blades = 16,300 FPM; Wing Blades = 16,300 FPM
  • Hitch Types: Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
  • Hitch Jack: Standard (7,000 lbs.)
  • Cutting Width: 15' - 0"
  • Overall Width: 15' - 11 3/4"
  • Normal Transport Width: 9'-1"
  • Minimum Transport Width: 7'-6" With transport locks & deflectors removed and cylinders fully retracted
  • Overall Length: 16' - 0"
  • Deck Height: 12"
  • Cutting Height: 2" to 14"
  • Lift Hydraulics: 3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing Hydraulics: 3" x 8" hydraulic cylinders, hoses & fittings
  • Wing Transport Protection: Wing transport lock pins
  • Deck Material: 10 gauge top deck and 7 gauge bottom deck
  • Side Skirt Material: Bolt-on replaceable 1/4" steel
  • Skid Shoes Wing Deck: Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
  • Skid Shoes Center Deck: Replaceable: 2 skid shoes
  • Blades - 6 (2 per Carrier): 1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift
  • Blade Overlap: 6"
  • Blade Bolt: Keyed with hardened flat washer & lock nut
  • Stump Jumper / Blade Holder: 3/16" Thick round dish-shaped pan, reinforced with 1" x 5" blade bar; or optional Shredder Kit
  • Deck Ring: Optional 1/2" x 3" fully welded
  • Front & Rear Guards: Optional rubber, single chain, double chain, or double chain with cable
  • Input Driveline 540 & 1000 rpm: Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
  • Intermediate Driveline: Category 5 star profile with slip-clutch
  • Wing Drivelines: Category 5 star profile with slip-clutch
  • Tire Options: 6" x 21" Laminated tires, 25.5" new tire with or without foam fill, 29" x 16 ply used aircraft tires without foam filling.
  • Number of Wheels: 6 - Wheel option: 4 on transport axle and one on each wing axle; 8 - Wheel option: 4 on transport axle and two on each wing axle
  • Transport Axle: Spring-cushioned on trailing arms
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
  • Colors: Standard color: Beige; Optional colors: Red, Green, Orange, or Yellow



Working Width
15 ft.
15 ft. 11-3/4 in.
16 ft.
5,660 lb.
Recommended HP
50-250 hp

Related Products